Minolta Di350 Service Manual page 136

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
No. Part Name
Toner Bottle Cover Open the Toner Bottle Cover. → Unhook the dowels at four
25
26 Harness Cover
27 Duplex Unit Rear
Cover
28 500-Sheet Cas-
sette Side Cover
29 Manual Bypass
Tray
30 Side Cover
31 Duplex Unit
32 Fusing Unit
Front Inside Cover Remove No. 8. → Remove No. 32. → Remove two screws that
33
34 Right IR Cover
places of the Toner Bottle Cover.
Remove one screw that secure the Harness Cover.
Remove No. 31. → Remove two screws that secure the
Duplex Unit Rear Cover.
Open the Side Cover. → Slide the Side Cover to the front and,
at the same time, pull the rear side out of the frame.
Remove No. 26. → Unplug one connector. → Remove three
screws that secure the Manual Bypass Tray.
Remove two screws that secure the Duplex Unit.
See D-26.
secure the Front Inside Cover.
Remove three screws that secure the Right IR Cover.
D-6
Removal Procedure