Minolta Di350 Service Manual page 99

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
<Scan-through ADF>
Touch Panel
Display
Registration
Zoom Adjust
<IR-Erasure Width>
Touch Panel
Display
IR-Erasure Width
Tech. Rep. Mode
Setting (The default is
Adjust registration in the main and sub scanning directions of the ADF.
-127 dot....................
Smaller
Adjust the scanning zoom ratio in the main and sub scanning direc-
tions of the ADF.
0.990 ....................
Smaller
Setting (The default is
Set the forced erasure width along the four edges of the paper to
erase shadows which are otherwise produced by the Original Scales.
0mm
Smaller
Tech. Rep. Choice
0 ................. +127 dot
1.000
...................................................3mm
S-21
).
Highlighted
Greater
.................. 1.010
Greater
).
Highlighted
Greater