Minolta Di350 Service Manual page 215

FrameMaker Ver.5.5E(PC) Di350 TROUBLESHOOTING
98.12.09
Code Description
C0650 Faulty Scanner Home Position
Sensor 1 PC12
C0651 Faulty Scanner Home Position
Sensor 2 PC13
C0990 LCC Lift-Up Motor EMOT mal-
function (PF-106)
C0991 Lift 1 ascent motion failure
(PF-106)
C0995 LCC Transport Motor HMOT
malfunction (PF-106)
C0999 Lift 2 ascent motion failure
(PF-106)
C099D Communications error (PF-
106)
C0B00 Transport Motor M1 drive mal-
function (FN-100/FN-500)
C0B0F Paper Entrance Switching
Motor M1 drive malfunction
(FN-100/FN-500)
C0B30 CD Aligning Motor M4 drive
malfunction (FN-100/FN-500)
C0B38 Shift Motor M5 drive malfunc-
tion (FN-100/FN-500)
C0B4D Paper Holding Tray Motor M10
drive malfunction (FN-100/FN-
500)
C0B4E Finisher Tray Motor M8 drive
malfunction (FN-100/FN-500)
C0B50 Stapling Motor drive malfunc-
tion (FN-100/FN-500)
C0BA0 Elevator Motor M9 drive mal-
function (FN-100/FN-500)
C0F32 Faulty ATDC Sensor E1
<The Power Switch is turned ON, Original Cover lowered, or
Start key pressed when the Scanner is at its home position>
• PC12 is not unblocked (H) even when the Scanner moves
10 mm to the left.
• PC12 is not blocked (L) even when the Scanner moves 4
mm to the right after PC12 has been unblocked (H).
<The Power Switch is turned ON, Original Cover lowered, or
Start key pressed when the Scanner is at any position other
than home>
• PC12 is not blocked (L) even when the Scanner moves
469.5 mm to the right.
When the Start key is pressed with a document loaded in the
Document Feed Tray of AF-7, PC13 is not blocked (L) even
when the Scanner moves 463 mm to the left after PC12 has
been unblocked (H).
See option service manual.
The value of data read by E1 is faulty. [E1 reading is 7% or
less (3.92V or more) or 19% or more (1.41V or less).]
T-28
Detection Timing