Minolta Di350 Service Manual page 209

FrameMaker Ver.5.5E(PC) Di350 TROUBLESHOOTING
98.12.09
(5) Paper Take-Up/Transport Misfeed (PF-106)
Take-Up Clutch 1 P1CL
Take-Up Clutch 2 P2CL
Paper Empty Sensor 1 PPS1
Paper Standby Position Sensor S1
Separator Clutch BCL
Registration Clutch RCL
Registration Sensor RSEN
<Paper Take-Up/Transport Misfeed (PF-106) Troubleshooting Procedure>
Symptom
• Paper is not
taken up at all.
• Paper is at a
stop before the
Paper Feed/
Separator Rolls.
Relevant Electrical Parts
Step Check Item
1 Does the paper being used
meet the product specifica-
tions?
2 Is the paper curled, wavy, or
damp?
3 Is the Paper Take-Up Roll
deformed, worn, or dirty
with paper dust?
Synchronizing Roller Sensor PC2
Transport Clutch CL2
Take-Up Sensor S3
LCC Main Board PWB-A: PF-106
Cassette Main Board PWB-A: PF-108/PF-110
Cassette Main Board PWB-A
Master Board PWB-A
Result
NO
YES Change the paper. Instruct the
YES Clean or change the Paper
T-22
1171C12TAA
Action
Instruct the user to use the
paper that meets product
specifications.
user on the storage of paper.
Take-Up Roll.