Minolta Di350 Service Manual page 135

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
No. Part Name
1 ADF Glass Assy.
2 Rear Holding
Bracket
3 Original Glass
4 Front Holding
Bracket
5 Control Panel
Front Upper Cover Remove No. 8. → Remove No. 12. → Remove six screws that
6
7 Exit Lower Cover
8 Front Cover
9 LED Cover
10 MP Cassette
11 500-Sheet
Cassette
12 Upper Front Left
Cover
13 Left Cover
14 Upper Cover
15 Left IR Cover
16 Original Cover
17 Rear Right IR
Cover
18 Left Hinge Cover
Rear Left IR Cover Remove No. 17. → Remove two screws that secure the Rear
19
Rear Upper Cover Remove No. 21. → Remove No. 17. → Remove No. 19. →
20
Rear Lower Cover Remove No. 26. → Remove No. 25. → Open No. 30. → Open
21
22 Right Hinge Cover Remove one screw that secure the Right Hinge Cover.
23 Connector Cover
Rear Inside Cover Remove No. 22. → Remove three screws that secure the Rear
24
Remove No. 2, 4. → Remove two holding brackets. →
Remove two screw caps. → Remove two screws that secure
the ADF Glass Assy.
Remove No. 17, 18. → Remove two screw caps. → Remove
two screws that secure the Rear Holding Bracket.
Remove No. 4. → Remove two holding brackets.
Remove two screw caps. → Remove two screws that secure
the Front Holding Bracket.
Remove No. 8. → Remove No. 6. → Remove No. 4. →
Remove No. 12. → Remove five screws that secure the control
panel and unplug one connector.
secure the Front Upper Cover.
Remove No. 32. → Remove No. 24. → Unhook the two tabs of
the Exit Lower Cover and remove the Exit Lower Cover.
Slide out No. 10. → Open No. 25. → Remove three screws
that secure the Front Cover.
Slide out No. 10. → Remove one screw that secure the LED
Cover.
Slide out the MP Cassette. → Pushing the tab on the right rail,
pull out the cassette.
Slide out the 500-Sheet Cassette. → Pushing the tabs on both
the right and left rails, pull out the cassette.
Remove No. 4. → Remove two screws that secure the Upper
Front Left Cover.
Remove six screws that secure the Left Cover.
Remove two screws that secure the Upper Cover.
Remove two screws that secure the Left IR Cover.
Remove No. 22. → Remove No. 19. → Remove two screws
that secure the Rear Right IR Cover.
Remove one screw that secure the Left Hinge Cover.
Left IR Cover.
Remove four screws that secure Rear Upper Cover.
No. 32. → Remove five screws that secure the Rear Lower
Cover.
Remove one screw that secure the Connector Cover.
Inside Cover.
D-5
Removal Procedure