Minolta Di350 Service Manual page 151

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
Cable on Hook End
Pulley G
Pulley E
9. Wind the hook end of the cable two turns counter-
1167D054AD
10. Wind the bead end of the cable four turns clock-
Cable on
Bead End
NOTE
Make sure that no part of the cable rides on the other.
1167D055AD
11. Slide the pulley toward the rear and install one
1167D075AA
12. Wind the bead end of the cable around pulley H
Pulley H
1167D076AA
13. Wind the hook end of the cable around pulley E
Pulley F
1167D078AA
clockwise from the front to the rear.
wise from the rear to the front. Then, secure the
cable with tape.
mounting screw and one E-ring.
and pulley G and hook the bead onto the Adjust-
able Anchor.
and pulley F.
D-21