Removal Of The Ccd Unit; Cleaning Of The Scanner Rails/Bushings - Minolta Di350 Service Manual

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09

(3) Removal of the CCD Unit

3. Unplug two connectors of the CCD Unit.
4. Remove two screws and the CCD Unit.
NOTES
1. When removing the CCD Unit, remove only those screws and parts that are specified.
(Remove the CCD Unit as one unit.)
2. Whenever the CCD Unit has been replaced, make the following adjustment:
FD of Zoom Adjust (IR).

(4) Cleaning of the Scanner Rails/Bushings

1. Remove the Original Glass.
2. Remove four screws and the Cover.
1167D014AB
1. Remove the Original Glass.
2. Using a soft cloth, wipe clean the Scanner Rails
and Bushings.
1167D016AB
D-15
1171D055AA