Minolta Di350 Service Manual page 115

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
Touch Panel
Display
Copy Kit Counter
Plug-In Counter
Key Counter
Vender Mode
Tech. Rep. Mode
Setting (The default is
Select whether to set the count or not for the Copy Kit Counter and
select whether to inhibit the initiation of a new copy cycle or not when
the Current value reaches Set value.
Mode 1
Mode 2
Mode 3
Select the condition by which the Key Counter count is increased.
Copies Made
See the Count-up Table for details.
Set whether a Key Counter is plugged in ("ON") or not ("OFF").
ON
Select the medium to be used when the Key Counter or Vender is
used.
This function is not valid if "OFF" is selected for "Key Counter."
OFF
Security Mode
No counting
Counted and permits copying even when the
Set value is reached.
Counted and inhibits copying when the Set
value is reached.
Coin
S-37
).
Highlighted
Copy Cycles
OFF
Card