Drive Mechanism; Fusing Rollers Pressure Mechanism - Minolta Di350 Service Manual

FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
1171SBM1901A

19-1. Drive Mechanism

• Drive from the Main Motor is transmitted via a gear train to the Right Fusing Roller.
Paper Exit Roller
Main Motor (M2)
Electrical Component
M2
1171SBM1902A

19-2. Fusing Rollers Pressure Mechanism

• To ensure that there is a certain width of area of contact between the Left and Right Fus-
ing Rollers, pressure springs are installed.
• The rollers are held pressed against each other at all times and they are released only
when servicing the copier or replacing parts.
• The pressure between the two rollers is approx. 17 kg.
• The rollers can be released by moving the Fusing Misfeed Clearing Lever in the direction
of the arrow.
Control Signal
PJ16A-1
Fusing Misfeed Clearing Lever
Pressure Spring
M-45
Right Fusing Roller
1167M057AB
ON
L
1167M077AF
OFF
H