Minolta Di350 Service Manual page 105

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
Touch Panel
Display
Trouble
Device
Maintenance
Tech. Rep. Mode
Malfunction
Code
C133B Communication Error (Option)
C13C0 I/C Initial Error
C13D0 EEPROM
<Clearing a Count>
Touch the item key whose count is to be cleared and press the Clear
key. If a count is accidentally cleared, pressing the Interrupt key will
undo the clear operation.
Shows the numbers of prints for different applications. It also allows
the Tech. Rep. to clear each counter.
Display
Copier
Printer
Report Print
Fax Print
Fax Transmission
<Clearing a Count>
Select the counter to be cleared with the item key and press the Clear
key. If the count is accidentally cleared, pressing the Interrupt key will
undo the clear operation.
• This function allows the Tech. Rep. to set the number of copies to
be made before the Maintenance Call reminder is given. (1k ~
9999k)
• It shows the current count value and the above setting. Each
counter may be reset to 0 independently of the others:
• When the count reaches the preset value, the icon "
the Status Display.
When "Call Indicated" is selected for "Maintenance Call" available
from Tech. Rep. Choice.
Display
Maintenance (Set)
Maintenance (Count)
<Setting a Count>
1. Touch [Maintenance (Set)] and then press the Clear key to clear
the count. If the count is accidentally cleared, pressing the inter-
rupt key will undo the clear operation.
2. Enter the desired value from the 10-Key Pad.
<Clearing a Count>
Touch [Maintenance (Count)] and then press the Clear key to clear
the count. If the count is accidentally cleared, pressing the interrupt
key will undo the clear operation.
Counter
Operation
<Trouble Counter 5/5>
Malfunction
Location
C13F0
C18XX
No. of prints made by copier
No. of prints made by printer
No. of report prints made
No. of fax prints made
No. of prints made for fax transmission
The Maintenance Call reminder is given when the count
reaches the preset value.
Counts one for each copy made.
S-27
Location
Code
HSYNC (SOS)
Printer Controller Error
Description
Description
" appears in