Step 7 Check The Job Status; Stopping A Copy Job - Fuji Xerox DocuScan C4250 User Manual

Step 7 Check the job status

STEP
As necessary, check whether the job has been processed successfully.
Selecting [Job Status] on the [All Services] screen displays the [Completed Jobs] screen.
Refer to
• For information about checking job status, refer to"5 Job Status (P. 127)"
3.2

Stopping a Copy Job

1. Press the <Stop> button on the control
panel.
A message appears confirming the
cancellation of the job.
2. Select [Yes].
A message appears informing you that the
cancellation is complete.
3. Select [Close].
Note
• Only pages that have not been transferred to the
printer can be cancelled.
Important
• Depending on the printer, you may need to cancel jobs
on the printer instead of on the scanner. In such event,
a message informing you of this appears on the touch
screen. When using the printer on a network, make
sure not to cancel other jobs by mistake.
• When starting a new copy job after cancelling a job,
make sure that the printer is in the ready-to-copy state.
1 2 3 4 5 6
Cancel Job
Do you want to cancel the job?
Job Cancelled
The job has been cancelled.
Check the job
7
status
Yes No
Close
3.2 Stopping a Copy Job
83