Fuji Xerox DocuScan C4250 User Manual page 235

Error when scanning 2-sided documents (003-770)
When scanning a 2 sided document from the document feeder, its scan size may
exceed the scannable area depending on the combination of the original size and scan
ratio. When this happens, the scanner goes into an error state and displays the error
code 003-770. If this error occurs, try scanning at a reduced scan ratio.
The above error occurs, for example, when a 2-sided A3 document is enlarged by
166% or above.
About the printer status
If the printer breaks down, the scanner may not accurately obtain the status of the
printer. In such case, check the display on the printer's control panel.
To accurately obtain the status of the printer, use the copy features after repairing the
printer.
Refer to
• For information about the breakdown and repair of the printer, refer to the user guide provided for the
printer.
A.5 Notes and Restrictions
235