Setting The Basic Copy Features - Fuji Xerox DocuScan C4250 User Manual

3.4

Setting the Basic Copy Features

This section describes how to set the basic copy features.
This corresponds to " Step 4 Set the copy features (P. 80)" in "3.1 Copying Procedure".
STEP
The basic copy features can be set on the [Basic Copying] screen.
[Basic Copying] screen
Note
• If old settings are still present on the [Basic Copying] screen, pressing the <Clear All> button on the
control panel resets them to the defaults. The defaults can be changed under [System Settings]. For
information about [System Settings], refer to "6 System Settings (P. 129)".
• Depending on the features provided by the printer, the features and defaults displayed on the scanner
vary. The interface screens in this manual are of when the printer supports all copy features of the
scanner.
3
1 2
Basic Copying Image Quality
Paper Supply Reduce
/ Enlarge
Auto Paper
Tray 1
A4
Tray 2
A3
More...
Set the copy
4
features
More Copy
Features
Output Color
100%
2 Sided
Auto %
70%
A3 A4
Lighten/Darken
More...
3.4 Setting the Basic Copy Features
5 6 7
85