Table of Contents
Advertisement
Recover Address Book
Address Book can be restored by the following two methods:
• [Overwrite]:
The addresses on the scanner that exist also on the USB flash memory will be
overwritten with the addresses on the USB memory. The addresses that exist on the
USB memory but not on the scanner will be added to the scanner. The addresses that
exist on the scanner but not on the USB flush memory will stay on the scanner without
being deleted.
• [Replace]:
The entire addresses on the scanner will be deleted and will be replaced with the
addresses on the USB flush memory.
1.
Insert the USB memory on which Address
Book is saved.
2.
On the [Maintenance/Diagnostics] screen,
select [Address Book Maintenance].
3.
On the [Address Book Maintenance]
screen, select [Recover Address Book].
4.
On the [Recover Address Book] screen,
select the desired recovery method, and
press the <Start> button on the control
panel.
5.
When Address Book is restored, a
message appears.
Note
• If the scanner fails to restore Address Book, a
message informing you of this appears. If the
message appears, try restoring Address Book again.
6.
Select [Close].
Recover Address Book
Overwrite
Replace
6.4 Common Settings
Close
151
Hide quick links:
Advertisement
Table of Contents
