Step 3 Select [Copy]; Step 4 Set The Copy Features - Fuji Xerox DocuScan C4250 User Manual

Step 3 Select [Copy]

STEP
Display the [All Services] screen, and select [Copy].
1. Press the <Copy> button on the control
panel, or select [Copy] on the [All Services]
screen.
Note
• The features assigned to the custom buttons can be
changed. For more information, refer to "Custom
Buttons 1 - 3 (P. 141)".
• When a password is set for [Copy], a screen
prompting you to enter the password appears. If
prompted, enter the password using the numeric
keypad and press [Confirm]. For information on how to
set passwords, refer to "Service Availability (P. 143)".

Step 4 Set the copy features

STEP
Set the required copy features such as paper type and copy ratio. The copy features can
be set on the following three types of screens.
Important
• The features and defaults displayed on the screens vary depending on the features provided by the
printer. The interface screens in this manual are of when the printer supports all copy features of the
scanner.
Basic Copying
Used when setting features such as paper type, copy ratio, and copy density.
Image Quality
Used when setting features such as image sharpness and document type.
More Copy Features
Used when setting features such as scan size and document orientation.
80
3 Copy
3
1 2
3
1 2
Select [Copy]
All Services
Copy
Scan to PC
Set the copy
4
features
4 5 6
Scan to E-mail
Scan to Media
5 6
7
Job Status
7