Step 6 Check The Job Status - Fuji Xerox DocuScan C4250 User Manual

When the scanning of the first document
completes, the message on the touch panel
changes.
Note
• If no operation is performed for a specific amount of
time, the scanner automatically assumes that there
are not more documents to be scanned and presumes
the scan job.
2. Load the next document.
Refer to
• For instructions on how to load documents, refer to
"1.5 Loading Documents (P. 23)".
3. Press the <Start> button on the control
panel. If you have more documents to scan,
repeat the process of loading a document
and pressing the <Start> button.
4. When all documents are scanned, select
[Last Original].

Step 6 Check the job status

STEP
As necessary, check whether the job has been scanned successfully.
Selecting [Job Status] on the [All Services] screen displays the [Completed Jobs] screen.
Refer to
• For information about checking job status, refer to "5 Job Status (P. 127)".
3
1 2
Press Start to scan.
Press Last Original to complete scanning.
E-mail Address: potter.beatrix@xxx.com
A4
Full Color
200dpi
Pages
Scanned
10
Last Original
4 5
6
Pages
Transferred
70%
Next Original
Check the job
status
2.1 Scanning Procedure
7
7
35