Panel Alert Tone
Sets the tone that goes off when an incorrect button was selected, or an operation was
attempted during an error.
The volume of the tone can be selected from [Soft], [Normal], and [Loud]. To disable the
tone, select [Off].
1.
On the [Audio Tone] screen, select [2.
Panel Alert Tone], and select [Change].
2.
On the [2. Panel Alert Tone] screen, select
the volume of the tone.
3.
Select [Save].
Note
• To cancel the setting, select [Cancel].
Machine Ready Tone
Sets the tone that informs you that the scanner is ready for scanning/copying.
The volume of the tone can be selected from [Soft], [Normal], and [Loud]. To disable the
tone, select [Off].
1.
On the [Audio Tone] screen, select [3.
Machine Ready Tone], and select
[Change].
2.
On the [3. Machine Ready Tone] screen,
select the volume of the tone.
3.
Select [Save].
Note
• To cancel the setting, select [Cancel].
Job Complete Tone
Sets the tone that goes off when a job has been completed successfully.
The volume of the tone can be selected from [Soft], [Normal], and [Loud]. To disable the
tone, select [Off].
1.
On the [Audio Tone] screen, select [4. Job
Complete Tone], and select [Change].
2.
On the [4. Job Complete Tone] screen,
select the volume of the tone.
3.
Select [Save].
Note
• To cancel the setting, select [Cancel].
138
6 System Settings
Cancel
2. Panel Alert Tone
Off
Soft
Normal
Loud
Cancel
3. Machine Ready Tone
Off
Soft
Normal
Loud
Cancel
4. Job Complete Tone
Off
Soft
Normal
Loud
Save
Save
Save