Table of Contents
Advertisement
Fault Tone
Sets the tone that goes off when a job finishes abnormally.
The volume of the tone can be selected from [Soft], [Normal], and [Loud]. To disable the
tone, select [Off].
1.
On the [Audio Tone] screen, select [5. Fault
Tone], and select [Change].
2.
On the [5. Fault Tone] screen, select the
volume of the tone.
3.
Select [Save].
Note
• To cancel the setting, select [Cancel].
Alert Tone
Sets the tone that goes off when a fault, such as a document jam, occurs and the job is held
in a fault state.
The volume of the tone can be selected from [Soft], [Normal], and [Loud]. To disable the
tone, select [Off].
1.
On the [Audio Tone] screen, select [6. Alert
Tone], and select [Change].
2.
On the [6. Alert Tone] screen, select the
volume of the tone.
3.
Select [Save].
Note
• To cancel the setting, select [Cancel].
Auto Clear Notif.
Sets the tone that goes off 5 seconds before the touch panel returns to the default screen.
The volume of the tone can be selected from [Soft], [Normal], and [Loud]. To disable the
tone, select [Off].
1.
On the [Audio Tone] screen, select [7. Auto
Clear Notif.], and select [Change].
2.
On the [7. Auto Clear Notif.] screen, select
the volume of the tone.
3.
Select [Save].
Note
• To cancel the setting, select [Cancel].
Cancel
5. Fault Tone
Off
Soft
Normal
Loud
Cancel
6. Alert Tone
Off
Soft
Normal
Loud
Cancel
7. Auto Clear Notif.
Off
Soft
Normal
Loud
6.4 Common Settings
Save
Save
Save
139
Hide quick links:
Advertisement
Table of Contents
