Fuji Xerox DocuScan C4250 User Manual page 56

Password
Set the password for the user set in [User Name]. This setting is mandatory.
Enter the password within 32 characters or symbols.
1. Select [ ] on the right side of the [Save In]
screen to display the [Password] entry box.
2. Select the [Password] entry box.
3. Enter the password using the numeric
keypad on the control panel.
Setting the File Name
Selecting [Change File Name...] on the [Save In] screen displays the [Change File Name]
screen. On this screen, you can set the file name of the scanned data and specify the action
to be taken when a file name conflict occurs.
Save In
Address Book...
SMB
Server
Save In
User Name
File Name
Set the file name of the scanned data.
When this is left blank, the file name will be assigned automatically based on the following
rule:
• Starts with "img-" followed by a nine-digit number indicating the saved date and time.
October, November, and December, however, are indicated as "X", "Y", and "Z",
respectively.
Example: img-102030400
When entering the file name, follow the guidelines below:
• Enter it within 20 characters or symbols.
56
2 Scan
More Scan
Basic Scanning
Features
Change File Name...
Preview
FTP
1/2
January 2nd, 03:04:00 (hr:min:sec)
img-X11123045 October 11th, 12:30:45 (hr:min:sec)
Basic Scanning More Scan
Save In
Address Book... Change File Name...
SMB FTP
Server DCSERVER
Save In planning/data
User Name smith
Basic Scanning More Scan
Save In
Address Book... Change File Name...
SMB FTP
Password
*****
Change File Name
File Name (Max. 20 chars.)
(Auto Set)
File Name Conflict
Change Name and Save
Features
Preview
1/2
Features
Preview
2/2
Cancel Save
Restore Auto