Setting The Basic Scan Features - Fuji Xerox DocuScan C4250 User Manual

2.7

Setting the Basic Scan Features

This section explains how to set the basic scan features.
This corresponds to " Step 4 Set the scan features (P. 32)" in "2.1 Scanning Procedure".
STEP
The basic scan features can be set on the [Basic Scanning] screen.
[Basic Scanning] screen
Note
• The above screen is the [Basic Scanning] screen when [Scan to E-mail] is selected. The content of the
screen, however, is the same even when [Scan to PC] or [Scan to Media] is selected.
• If old settings are still present on the [Basic Scanning] screen, pressing the <Clear All> button on the
control panel resets them to the defaults. The defaults can be changed under [System Settings]. For
information about [System Settings], refer to "6 System Settings (P. 129)".
From the [Basic Scanning] screen, access the setting screen for each available feature.
<Example>
On each setting screen, configure the required settings and select [Save] when you are
done.
When you want to delete or cancel the settings you entered, select [Cancel].
1 2 3
E-mail Address Basic Scanning More Scan
Output Color File Format
Full Color
Grayscale
Black
File Format
PDF
DocuWorks
TIFF
Set the scan
4
features
Features
2 Sided Orig.
PDF
Original Type
DocuWorks
TIFF
Lighten/Darken
More...
Cancel Save
Multi-page
TIFF
JPEG
2.7 Setting the Basic Scan Features
5 6 7
61