Color Balance (Adjusting The Color Balance Of The Output) - Fuji Xerox DocuScan C4250 User Manual

1. On the [Image Quality] screen, select [Auto
Exposure].
2. On the [Auto Exposure] screen, select [On]
or [Off].
3. Select [Save].

Color Balance (Adjusting the Color Balance of the Output)

The Color Balance feature allows you to adjust the level of four process colors (yellow,
magenta, cyan, and black). The color balance can be adjusted in seven levels for areas of
low, medium, and high density.
Original
Important
• This feature is not available if the scanner is connected to a monochrome printer.
• When [Output Color] is set to [Black], this setting only applies to black.
Note
• If you change the settings on [Color Balance] screen after configuring them on the [Image Quality
Presets] screen, the settings configured on the [Image Quality Presets] screen will become invalid.
Selecting [Color Balance] displays the [Color Balance] screen. On this screen, you can
select a color and adjust its intensity.
100
3 Copy
Enhanced cyan Enhanced magenta
Basic Copying Image Quality
Presets
Normal
Original Type
Text & Photo
(Halftone)
Auto Exposure
On
Auto Exposure
This feature does not work
Off
when Photo is selected
as the Original Type.
On
Color Balance
Enhanced yellow
More Copy
Features
Color Balance
Y 0 0 0/M 0 0 0
C 0 0 0/K 0 0 0
Sharpness
Sharper
Color Saturation
Normal
Cancel Save
Enhanced black