Registering An Address Folder - Fuji Xerox DocuScan C4250 User Manual

To check the [CW Internet Services] settings:
The scanner's control panel > [System Settings] > [Network Settings] > [Port Settings].
• If TCP/IP is set correctly.
To check the TCP/IP setting:
The scanner's control panel > [System Settings] > [Network Settings] > [Protocol Settings]
CentreWare Internet Services > [Properties] > [Protocol Settings] > [TCP/IP]
• If the SNMP port is set to "161".
• If [Community Name] is correct. The default is "public".
To change [Community Name]:
CentreWare Internet Services > [Properties] > [Protocol Settings] > [SNMP]
• Extend the time-out value in the [Search Conditions] dialog box.
• Change the subnet in the [Search Conditions] dialog box.

Registering an Address Folder

Before registering an address, you must create a folder in which the address is to be saved.
1. In the Tree View area on the [DocuScan Address Book Tool] window, select an
address folder that is not used from [Address Book].
1
2. Click [
The properties dialog box of the folder appears.
3. Enter the name of the folder in [Folder Name] within 16 characters or symbols (ASCII
characters). In this example, we will name the folder "common".
This setting is optional. If you leave this blank, the folder will be named "No name".
Note
• To set a password to the folder, select the [Set password] check box, and enter the password. The
password should be a 4 to 8-digit number. If you set the password, you will be asked to enter it when
openning the folder.
4. Click [OK].
The color of the folder icon in the Tree View area changes, and the name of the folder
is displayed.
(Properties)] on the toolbar, or select [Properties] from the [File] menu.
3
4
7.2 Registering an Address
181