Fuji Xerox DocuScan C4250 User Manual page 116

Setting Items for Scan to PC
DocuScan Manager/
CentreWare Internet Services
Item
Transfer The method to be used when transferring scanned
Protocol data from the scanner.
Select [SMB] when saving scanned data in a
Windows shared folder. Select [FTP] when saving it
on an FTP server.
Save In A computer on which to send scanned data.
(Server • Enter this within 64 characters or symbols (ASCII
Name/IP characters).
Address) • Control characters (such as linefeeds) cannot be
(Manda- used.
tory) • Enter this in one of the following formats:
FQDN format
Example: pcname.example.com
Computer name (NetBIOS name)
Example: pcname
DNS host name
Example: pcname
IP address
Example: 192.168.1.100
Note
• If entering this in FQDN format, [Properties] >
[Protocol Settings] > [TCP/IP] > [DNS] >
[DNS Server Address] must be set on
CentreWare Internet Services.
• Computer name (NetBIOS name) can be
entered only when [Transfer Protocol] is set
to [SMB].
• When [Transfer Protocol] is SMB and if
entering the computer name of a computer
located on other subnet, [Properties] >
[Protocol Settings] > [TCP/IP] > [WINS] >
[WINS Server Address] must be set on
CentreWare Internet Services.
• If entering a DNS host name, the location
where the scanned data will be saved must
be in the domain specified in [Properties] >
[Protocol Settings] > [TCP/IP] > [DNS] >
[DNS Server Address]/ [DNS Domain Name]
on CentreWare Internet Services.
• If entering a DNS host name when [Transfer
Protocol] is [SMB], and if a computer that
uses the same name for its computer name
(NetBIOS name) exists on the same subnet
as the scanner, scanned data will be saved
on that computer.
Port Num- A port number to be used to communicate with a
ber server.
(Manda- • When [Transfer Protocol] is [FTP], enter 21 or
tory) any integer between 5,000 and 65,535.
• When [Transfer Protocol] is [SMB], enter 139 or
any integer between 5,000 and 65,535.
SMB The shared name of a shared folder in which to
Shared save scanned data.
Name • Enter this within 32 characters or symbols (ASCII
(Manda- characters).
tory) • Control characters (such as linefeeds) cannot be
used.
• When [Transfer Protocol] is [SMB], this setting is
mandatory.
116
4 Address Book and Subject/Comment List
Setting Items
Description
How Used on the Scanner's Control Panel
• Set this on the [Save In] screen.
• If you open an address folder, the address numbers,
server names, and transfer protocols of the addresses
contained in the folder will be listed.
• This corresponds to [Server] on the [Save In] screen.
• Enter this in [Server/IP Address] as a search keyword
when searching the address.
• To verify this, select the address from Address Book
and select [Details...].
To verify this, select the address from Address Book and
select [Details].
This corresponds to [Shared Name] on the [Save In]
screen. [Shared Name] is displayed when [Transfer
Protocol] is set to [SMB].