Audio Tones - Fuji Xerox DocuScan C4250 User Manual

Auto Power Saver
Sets the time to wait until the scanner goes into the Power Saver mode to save energy
consumption.
This can be set from 1 to 60 minutes in increments of 1 minute. To disable the Power Saver
mode, select [Off].
1. On the [Machine Clock/Timers] screen,
select [8. Auto Power Saver], and select
[Change].
2. On the [8. Auto Power Saver] screen, set
whether or not to use the Power Saver
mode.
3. When [On] is selected in Step 2, set the
time using [ ]/[ ].
4. Select [Save].
Note
• To cancel the setting, select [Cancel].

Audio Tones

Selecting [Audio Tones] on the [Common Settings] screen displays the [Audio Tones]
screen.
On this screen, you can enable/disable the audio tones and set their volume.
Common Settings
Machine Clock
/ Timers
Screen Defaults
Service Availability
Other Settings
Panel Select Tone
Sets the tone that goes off when a correct button is selected on the touch panel.
The volume of the tone can be selected from [Soft], [Normal], and [Loud]. To disable the
tone, select [off].
1. On the [Audio Tone] screen, select [1.
Panel Select Tone], and select [Change].
2. On the [1. Panel Select Tone] screen,
select the volume of the tone.
3. Select [Save].
Note
• To cancel the setting, select [Cancel].
Close
Audio Tones
Original Size
Button
Service Login
Maintenance
/ Diagnostics
Cancel
8. Auto Power Saver
From last selection
Off
to Sleep Mode
On
Audio Tones
Items Current Settings
1. Panel Select Tone
2. Panel Alert Tone
3. Machine Ready Tone
4. Job Complete Tone
5. Fault Tone
Cancel
1. Panel Select Tone
Off Soft
Normal
Loud
6.4 Common Settings
Save
(1 - 60)
10 Minutes
Close
Change
Normal
Normal
Normal
1/2
Normal
Normal
Save
137