Entering Characters; Using The Numeric Keypad - Fuji Xerox DocuScan C4250 User Manual

1.2

Entering Characters

To enter characters, use the numeric keypad on the control panel.
You can enter alphanumeric characters and symbols.

Using the Numeric Keypad

The following characters can be entered by pressing the corresponding buttons on the
numeric keypad.
Locate the button labelled with the character you want to enter, and press the button
repeatedly until the character appears on the touch panel.
Each button displays the characters in the order indicated in the chart: a number, the lower-
case characters, and then the upper-case characters.
When a button is pressed continuously after the last character is displayed, it goes back to
display the first character and then the rest of the characters in the same order.
Example: When the [2] button is pressed repeatedly, the touch panel displays:
If you press the [ ] button repeatedly when a character is displayed (before confirming its
entry), the rest of the characters will display in the reversed order.
18
1 Basic Operation
2 > a > b > c > A > B > C > 2 > a...
Number Button Assigned Numbers/Characters
[1] button 1 @ : . /
[2] button 2 a b c A B C
[3] button 3 d e f D E F
[4] button 4 g h i G H I
[5] button 5 j k l J K L
[6] button 6 m n o M N O
[7] button 7 p q r s P Q R S
[8] button 8 t u v T U V
[9] button 9 w x y z W X Y Z
[0] button 0 Space
[*] button - _ ~
[#] button
! " # $ % & ' ~ ^ \ |
/ = ( ) [ ] { } < >
`
; : ? @ _ , . + - *