Step 5 Start The Scan Job - Fuji Xerox DocuScan C4250 User Manual

Step 5 Start the scan job

STEP
To start scanning, return to the screen where you set the "Save In" location in " Step 3 Select
the scan type (P. 31)".
1. Display the [E-mail Address]/[Save In]
(Scan to PC)/[Save In] (Scan to Media)
screen.
2. If you want to preview the scanned image,
select the [Preview] check box.
3. Press the <Start> button on the control
panel.
Important
• When the document is loaded into the document
feeder, do not hold it while it is being fed.
Note
• If a problem occurs, the touch panel displays a
message. Follow the instructions in the message to
remedy the problem. If an error code is displayed,
refer to "8.7 Error Codes (P. 208)" for suggested
solutions.
• It may take some time for the scanner to start
scanning. The scanner starts scanning after verifying
the status of the "Save In" location.
Preview
When the [Preview] check box is selected, press the <Start> button to display the preview
of the image. You can verify the scan result on the preview screen.
Note
• The preview may not show the fine details of the image. The details, however, are scanned and saved
as they appear on the original.
1. Verify the scanned image on the preview
screen.
90-degree CW/90-degree CCW
Rotates and saves the scanned image.
This setting applies also to the rest of the pages.
Note
• Images can be rotated only when scanned in PDF or
DocuWorks format.
1 2 3
Start the scan job
5
4
E-mail Address Basic Scanning More Scan
Address Book...
From
To
Jane Smith
CC
System Design Group
BCC
ABC Corp.
Last Original
6
Features
Details...
Clear
Preview
90-degree CW
90-degree CCW
Preview
Next Page
1 pages scanned
Stop
Next Original
2.1 Scanning Procedure
7
1/9
33