File Name - Fuji Xerox DocuScan C4250 User Manual

Reply to
Set the return address of the e-mail you are attaching the scanned data to. The return
address can be selected from Address Book or entered using the numeric keypad. When
selected from Address Book, the name set for [Recipient Name] will be set as the name of
the return address.
Note
• The scanner cannot receive e-mail. It is recommended to set an address that can receive e-mail, such
as the administrator's address, in case the e-mail server returns e-mail in the event of errors.
• The characters that can be used for entering the return address are the same as for the recipient's
address.
1. On the [Details] screen, select [Reply to],
and select [Change].
2. On the [Enter/Change Reply To] screen,
select [Address Book...], and select the
return e-mail address.
When entering it on the control panel, enter
it in the [Reply to] entry box.
Refer to
• For information on how to enter addresses, refer to
"Setting the Recipient's E-mail Address (P. 42)".
3. Select [Save].

File Name

Set the file name of the scanned data.
When this is left blank, the file name will be assigned automatically based on the following
rule:
• Starts with "img-" followed by a nine-digit number indicating the saved date and time.
October, November, and December, however, are indicated as "X", "Y", and "Z",
respectively.
Example: img-102030400
When entering the file name, follow the guidelines below:
• Enter it within 20 characters or symbols.
• The following symbols cannot be used:
* " / \ < > : | ? = , . ; [ ] +
46
2 Scan
January 2nd, 03:04:00 (hr:min:sec)
img-X11123045 October 11th, 12:30:45 (hr:min:sec)
Details
Scan Data from [Host Name]
Subject
Reply to (Not Set)
File Name (Auto Set)
(Auto Set)
Comment
Cancel
Enter/Change Reply To
Address Book...
Reply to
Close
Change
Save