Protocol Settings - Fuji Xerox DocuScan C4250 User Manual

CW Internet Services
Sets whether to enable or disable CentreWare Internet Services (HTTP port).
1. On the [Port Settings] screen, select [2. CW
Internet Services], and select [Change].
2. On the [2. CW Internet Services] screen,
select [Enable] or [Disable].
3. Select [Save].
Note
• To cancel the setting, select [Cancel].

Protocol Settings

Selecting [Protocol Settings] on the [Network Settings] screen displays the [Protocol
Settings] screen.
On this screen, you can configure the items required for network communication, such as
Ethernet port and TCP/IP (IP address, method for obtaining IP address, subnet mask, and
gateway).
Network Settings
Port Settings
Ethernet Setting
Sets the communication speed of the Ethernet interface.
The communication speed can be selected from [Auto], [100BASE-TX (Full Duplex)],
[100BASE-TX (Half Duplex)], [10BASE-T (Full Duplex)], and [10BASE-T (Half Duplex)]
When [Auto] is selected, the scanner automatically switches the communication speed to
100BASE-TX (Full Duplex), 100BASE-TX (Half Duplex), 10BASE-T (Full Duplex), or
10BASE-T (Half Duplex).
1. On the [Protocol Settings] screen, select [1.
Ethernet Setting], and select [Change].
2. On the [1. Ethernet Settings] screen, select
the desired communication speed.
3. Select [Save].
Note
• To cancel the setting, select [Cancel].
Close
Protocol Settings
Cancel
2. CW Internet Services
Disable
Enable
Protocol Settings
Items Current Settings
1. Ethernet Setting Auto
2.
IGet IP Address
3. 0.0.0.0
IP Address
4. 0.0.0.0
Subnet Mask
5. 0.0.0.0
Gateway
Cancel
1. Ethernet Setting
10 BASE-T
Auto
(Full Duplex)
100 BASE-TX 10 BASE-T
(Full Duplex) (Half Duplex)
100 BASE-TX
(Half Duplex)
6.5 Network Settings
Save
Close
Change
DHCP/Autonet
1/1
Save
155