Table of Contents
Advertisement
Reduce/Enlarge - 3
Sets the default copy ratio of the third button of the four displayed under [Reduce/Enlarge]
on the [Basic Copying] screen.
1.
On the [Basic Copying] screen, select [3.
Reduce/Enlarge - 3], and select [Change].
2.
On the [3. Reduce/Enlarge - 3], select the
desired copy ratio.
3.
Select [Save].
Note
• To cancel the setting, select [Cancel].
Copy Defaults
Selecting [Copy Defaults] on the [Copy Settings] screen displays the [Copy Defaults]
screen.
On this screen, you can set the default of each copy feature.
The copy features will reset to the defaults when the scanner is switched on, when it is re-
activated from the Power Saver mode, or when the <Clear All> button is pressed.
Set frequently-used settings to save the time of entering them on the control panel.
Note
• The setting items and values vary depending on the printer. The screens used in this section are of when
the printer supports all copy features of the scanner.
Refer to
• For more information about the copy features, refer to "3 Copy (P. 79)".
Copy Settings
Basic Copying
Auto Exposure
Level
160
6 System Settings
Close
Copy Defaults
Print Auditron
Settings
Cancel
3. Paper Supply - 3
50%
A3 A5
A3 A4/B4 B5
70%
B4 A4/B5 A5
81%
A3 B4/A4 B5
86%
115%
B4 A3/B5 A4
122%
A4 B4/A5 B5
Copy Defaults
Items
Current Settings
1.
Paper Supply
Auto Paper
2.
Paper Type - Bypass
Plain
3.
Paper Size - Bypass
A3
4. Reduce / Enlarge
100%
Black
5. Output Color
Save
1/2
Close
Change
1/1
Hide quick links:
Advertisement
Table of Contents
