Stopping A Scan Job - Fuji Xerox DocuScan C4250A Setup And Quick Reference Manual

If you have more documents to scan, select
[Next Original]. Otherwise, select [Last
Original].
4. If you do not want to view the preview of the
second page onward, clear the [Preview
Next Page] check box.
Note
• If you rotate an image on the preview of its first page,
the the rest of the pages will be rotated in the same
direction.
• When rotating a 2-sided document, the direction of the
rotation can be specified for each side of the
document.
• If you want to scan the document again, select [Stop].
Selecting [Stop] displays the following screen.
Cancel Job
Do you want to cancel the job?
Selecting [Yes] stops the scan job and displays the
following screen.
Job Cancelled
The scanned job has been cancelled.
Return the scanned documents and reload
all originals again.
5. Press the <Start> button on the control
panel.
The scanning starts.
Yes No
Close

Stopping a Scan Job

Use the following procedure to stop a scan job.
1. Press the <Stop> button on the control
panel.
A message appears confirming the
cancellation of the job.
2. Select [Yes].
Cancel Job
Do you want to cancel the job?
A message appears informing you that the
cancellation is complete.
3. Select [Close].
Job Cancelled
The job has been cancelled.
Yes No
Close
Stopping a Scan Job
IE
IE
55