Time - HP STORAGEWORKS SSL1016 Reference Manual

7. At each position of the server address, scroll to the correct number and press
Figure 32: Setting the time server address
Note:
8. Press Enter.
9. Press Escape or Enter to return to the Ethernet submenu.

Time

If you cannot access a time server because your server does not support SNTP or
for security reasons, you can set the time manually. If you want to include time
changes such as daylight savings time, you must make those changes manually as
well.
Note:
it is lost and needs to be reset whenever the autoloader is power cycled.
To set the timezone:
1. On the main menu, scroll to Configuration.
Figure 33: Main menu
SSL1016 Tape Autoloader Reference Guide
Enter to advance your cursor.
Time Server:
192.005.044.041
Use the Escape key to backspace to a previous text box, if necessary.
When you have set the server address, the autoloader displays Enter to save.
Time Server changed to appears on the panel display. You do not need to
reboot the autoloader.
The DLT1 and SDLT autoloaders do not have a battery so if time is manually set,
Status
Commands
Configuration
Diagnostics
Installation and Configuration
53