Inserting The Cleaning Tape; Storing The Cleaning Tape - HP STORAGEWORKS SSL1016 Reference Manual

Tape Drive Cleaning
9. Press Enter.
10. To deconfigure the slot, press Enter again.

Inserting the Cleaning Tape

There are two methods for inserting the cleaning tape:
To insert the cleaning tape through the mailslot:
1. On the main menu, scroll to Command.
2. Press Enter.
3. On the Command submenu, scroll to Cleaning Tape.
4. Press Enter.
5. Log in as Operator.
6. On the Cleaning Tape submenu, scroll to Enter Cleaning Tape.
7. Press Enter.
8. Once you insert the cleaning tape through the mailslot, do one of the

Storing the Cleaning Tape

When you store the cleaning tape, you can use it in the following ways:
120
The selected slot has a ! next to the slot number.
The selected slot no longer has a ! next to the slot number.
Load the cleaning tape directly into an ejected magazine and then reload the
magazine.
Insert the cleaning tape through the mailslot.
A countdown appears on the LCD. You have 20 seconds to insert the cleaning
tape through the mailslot before it relocks. Push the cartridge in. When
prompted, press Enter. The system accepts the tape. If you try to load a
cleaning tape through the mail slot without having configured a cleaning slot,
the autoloader rejects the tape.
following:
Proceed directly to manual cleaning.
Store the cleaning tape in a magazine slot to be used later.
Use it for manual cleaning.
SSL1016 Tape Autoloader Reference Guide