Installing A Magazine - HP STORAGEWORKS SSL1016 Reference Manual

Installing a Magazine

To install a magazine:
Note:
magazines are not compatible with the SSL1016 Ultrium 460 Autoloader. Ultrium
magazines are not compatible with the SSL1016 DLT1 Autoloader or the SSL10106
SDLT 320 Autoloader.
1. Grasp the magazine by the handle with one hand and support it underneath
2. Slide the magazine into the magazine bay. Make sure you position the
Figure 55: Installing a magazine
3. The magazine is correctly installed when you feel it click into place and the
SSL1016 Tape Autoloader Reference Guide
Be sure you are using the proper magazine for your autoloader. DLT/SDLT
with the other hand.
magazine correctly; it should slide smoothly.
Caution: Be sure that you install only a left-oriented magazine in the left bay
and a right-oriented magazine in the right bay.
front is flush with the front panel. Left Mag Inserted or Right Mag Inserted
appears on the LCD.
Autoloader Operation
83