HP STORAGEWORKS SSL1016 Reference Manual page 45

To set the control mode:
1. On the main menu, scroll to Configuration.
Figure 22: Main menu
2. Press Enter.
3. On the Configuration submenu, scroll to Change Mode.
Figure 23: Select Change Mode
4. Press Enter.
Figure 24: Mode Options
5. Do one of the following:
6. Reboot for the new mode to take affect.
The new control mode is now in effect.
SSL1016 Tape Autoloader Reference Guide
Status
Commands
Configuration
Diagnostics
SCSI ID
Ethernet
Time
Change Mode
Cleaning Tape
The mode options appear. A checkmark appears after the enabled mode.
Random
Mixed
Sequential
Seq Cycle Mode
To change the control mode, scroll to the desired mode and press Enter.
A checkmark appears. Press Enter again.
To leave the control mode unchanged, press Escape.
a. Press and hold the power button on the front panel until Power Off
appears on the LCD.
b. Press the power button again to power on the autoloader.
Installation and Configuration
45