View Ethernet Information; Run Inventory - HP STORAGEWORKS SSL1016 Reference Manual

Tape autoloader
Hide thumbs Also See for STORAGEWORKS SSL1016:
Table of Contents

Advertisement

View Ethernet Information

To view Ethernet information:
1. On the main menu, scroll to Status. (See
2. Press Enter.
3. On the Status submenu, scroll to Ethernet Info. (See
4. Press Enter.
Figure 71: View Ethernet information
Table 12: Ethernet Information Messages
Mac Address
IP Address
Network

Run Inventory

The autoloader provides a method to keep track of the cartridges currently loaded
in the magazines. If your autoloader is equipped with a barcode reader, it can scan
the cartridge barcode labels and store the data in its non-volatile memory.
The autoloader automatically runs an inventory whenever you power it on or
insert a magazine.
To take inventory:
1. On the main menu, scroll to Commands.
2. Press Enter.
SSL1016 Tape Autoloader Reference Guide
A list of messages similar to the following screen appears.
MAC address:
00-e0-9e-03-0e-39
IP Address
16.116.76.46
Network: Disconnected
Figure
Indicates the serial number of your Ethernet card.
The number indicates the static IP address or the
currently assigned dynamic IP address.
Indicates whether or not the autoloader is connected to
the network.
Autoloader Operation
61.)
Figure
62.)
95

Advertisement

Table of Contents
loading

Table of Contents