View Tape Drive Status - HP STORAGEWORKS SSL1016 Reference Manual

Figure 68: Element status screen

View Tape Drive Status

To view the tape drive status:
1. On the main menu, scroll to Status. (See
2. Press Enter.
3. On the Status submenu, scroll to Drive Info. (See
4. Press Enter.
5. On the Drive Info submenu, scroll to Status. (See
6. Press Enter.
Figure 69: Drive status screen
SSL1016 Tape Autoloader Reference Guide
The Element Status screen appears, displaying the barcode label for that
cartridge (if an inventory has previously been run). A move command also
appears on the screen.
Label:
DRC101
Move Slot 2 To:
Slot 9
Esc to Exit
a. If you want to move the cartridge scroll until the location you want to
move to appears under TO:, then press Enter.
b. If you do not want to move the cartridge, press Escape.
A list of messages similar to the following screen appears.
SCSI ID 5
Loader LUN 1
Compression Enabled
Drive Cart Present
Autoloader Operation
Figure 61.)
Figure 62.)
Figure 63.)
93