HP STORAGEWORKS SSL1016 Reference Manual page 78

Autoloader Operation
After Load cartridge appears on the LCD, a countdown appears. You have 20
seconds to load a cartridge through the mailslot before it relocks. The autoloader
automatically loads the cartridge into the tape drive.
Note:
Figure 53: Inserting a cartridge into the mailslot
To insert a cartridge to a magazine slot:
1. On the main menu, scroll to Commands.
2. Press Enter.
3. On the Commands submenu, scroll to Enter.
4. Press Enter.
5. On the Enter submenu, scroll to To Location.
6. Press Enter.
7. Scroll to the slot where you want to store the cartridge.
8. Press Enter.
78
Only insert the cartridge until you meet resistance.
A map of all the magazine slots appears. Occupied slots are indicated by an
asterisk.
SSL1016 Tape Autoloader Reference Guide