Set the Compression
Note:
data that is already compressed. Attempting to compress compressed data can reduce
performance and increase data size.
To set the compression:
1. On any Web Administration page, click Configurations.
2. If a checkmark appears in the box next to Compression, compression is
3. If no checkmark appears in the box next to Compression, compression is
4. Click submit.
Figure 83: Setting the compression
SSL1016 Tape Autoloader Reference Guide
Typically you will want to leave this option enabled unless you are backing up
enabled. To disable compression, click the box to remove the checkmark.
disabled. To enable compression, click the box to enter a checkmark.
Autoloader Operation
109