HP STORAGEWORKS SSL1016 Reference Manual page 31

7. Attach one U-channel bracket to each rear rail of the rack, loosely installing
Figure 10: Attaching the U-channel brackets to the rack
8. Position the autoloader in the rack so that each support bracket rests on a
Figure 11: Positioning the autoloader in the rack
SSL1016 Tape Autoloader Reference Guide
the screws through the clipnuts. (Attach the side of the bracket with only two
holes.) Do not tighten the screws.
U-channel bracket. Each support bracket slides along the lip of the U-channel
bracket.
Installation and Configuration
31