Status Leds; On/Off Button; Magazines - HP STORAGEWORKS SSL1016 Reference Manual

Tape autoloader
Hide thumbs Also See for STORAGEWORKS SSL1016:
Table of Contents

Advertisement

Status LEDs

The status LEDs show autoloader and drive status information. The left, green
LED shows ready status information, and the right, amber LED shows fault status
information.

On/Off Button

The On/Off button is a soft key, which means that if the autoloader is moving any
cartridges when you press the On/Off button, it finishes moving them before
powering off. However, any other functions, such as writing to a tape or
performing a diagnostic test are interrupted and terminated when you press the
On/Off button.

Magazines

The magazines contain part of the robotics that move the cartridges inside the
autoloader. The autoloader is equipped with two cartridge magazines. The
magazines are removable, and each magazine accommodates up to eight
cartridges. The magazines store your data tape cartridges and can also store your
cleaning cartridge.
Figure 3: Magazine
SSL1016 Tape Autoloader Reference Guide
Overview
17

Advertisement

Table of Contents
loading

Table of Contents