Time Server - HP STORAGEWORKS SSL1016 Reference Manual

Installation and Configuration
7. At each position of the server address, scroll to the correct number and press
Figure 31: Setting the SNMP server address
Note:
8. Press Enter.
9. Press Escape or Enter to return to the Ethernet submenu.

Time Server

You can connect the autoloader to a server that will supply the correct date and
time using Simple Network Time Protocol (SNTP). The autoloader uses this
information to time stamp information in its memory.
To set a time server:
1. On the main menu, scroll to Configuration. (See
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See
4. Press Enter.
5. On the Ethernet submenu, scroll to Set Time Server. (See
6. Press Enter.
52
Enter to advance your cursor.
SNMP Server:
255.255.255.255
Use the Escape key to backspace to a previous text box, if necessary.
When you have set the server address, the autoloader displays Enter to save.
SNMP Server changed to appears on the LCD. You do not need to reboot the
autoloader.
Figure 25.)
Figure
Figure
SSL1016 Tape Autoloader Reference Guide
26.)
27.)