Set Passwords - HP STORAGEWORKS SSL1016 Reference Manual

2. Press Enter.
3. On the Configuration submenu, scroll to Security.
Figure 41: Select Security
4. Press Enter.
5. On the Security submenu, scroll to Security. If a checkmark appears after the
Figure 42: Security options
6. To change the setting, press Enter.

Set Passwords

Many operations on the autoloader are password-protected to ensure data
integrity. You can set passwords at the administrator level and at the operator
level. Operator-level users have access to the Commands and Status menus.
Administrator-level users have access to all functionality.
Passwords must be exactly six numbers long. The default password is 000000.
To set a password:
1. On the main menu, scroll to Configuration. (See
2. Press Enter.
3. On the Configuration submenu, scroll to Security. (See
4. Press Enter.
SSL1016 Tape Autoloader Reference Guide
Cleaning Tape
Compression
I/E Slot
Security
word, the security option is on. If no checkmark appears, the security option is
off.
Security
Set Password
This toggles the security option. For example, if the security option was set to
On, it is now set to Off, and no checkmark appears.
Installation and Configuration
Figure 40.)
Figure 41.)
57