Update Firmware; Configuration; Import/Export Slot - HP STORAGEWORKS SSL1016 Reference Manual

4. Press Enter.

Update Firmware

Autoloader firmware can be updated by using Library & Tape Tools (L&TT).
Additional details can be obtained at:
http://www.hp.com/support/tapetools

Configuration

To change any Ethernet configurations, see "Ethernet" in Chapter 2.

Import/Export Slot

Note:
ISV software.
To change the configuration of the Import/Export slot:
1. On the main menu, scroll to Configuration.
Figure 74: Main menu
2. Press Enter.
SSL1016 Tape Autoloader Reference Guide
If a check appears next to Compression, the compression option is enabled. If
no checkmark appears, the compression option is disabled.
a. To leave the compression option unchanged, press Escape.
b. To change the compression option, press Enter.
Any change requires a power cycle of the autoloader and reconfiguration of the
Status
Commands
Configuration
Diagnostics
Autoloader Operation
97