HP STORAGEWORKS SSL1016 Reference Manual page 121

To store the cleaning tape:
1. After you have inserted the tape through the mailslot into the drive for
2. Press Enter.
3. On the submenu, scroll to Cleaning Tape Location.
4. Press Enter.
5. Log in as Administrator.
Note:
indicates a slot occupied by a data cartridge, a (@) indicates a slot occupied by a
cleaning cartridge, and an (!) indicates an empty slot designated as cleaning slot.
Slot 5
Slot 9
Slot 13*
Figure 89: Magazine slot map
6. Scroll to the slot where you want to store the cleaning tape.
Note:
stored.
SSL1016 Tape Autoloader Reference Guide
If the Auto Clean function is enabled, the autoloader can move the cleaning
tape from the magazine slot to the tape drive and, after the cleaning cycle,
return it to its slot.
If backup software cleaning function is enabled, the software can move the
cleaning tape from the magazine slot to the tape drive and, after the cleaning
cycle, return it to its slot (for more information, see your backup software's
documentation).
cleaning, on the main menu, scroll to Configuration.
The Configuration submenu appears.
A map of all the magazine slots appears.
When a map of the magazine slots appears on the display, an asterisk (*)
Slot 1 Slot 2* Slot 3*
Slot 6
Slot 7*
Slot 10* Slot 11*
Slot 14* Slot 15*
If you store the cleaning tape, you must specify in which slot the tape is to be
Slot 4*
Slot 8*
Slot 12*
Slot 16!
Tape Drive Cleaning
121