View Tape Drive Version - HP STORAGEWORKS SSL1016 Reference Manual

Autoloader Operation
Table 10: Tape Drive Status Messages
SCSI ID
Loader LUN
Compression
Drive Cart

View Tape Drive Version

To view the tape drive version:
1. On the main menu, scroll to Status. (See
2. Press Enter.
3. On the Status submenu, scroll to Drive Info. (See
4. Press Enter.
5. On the Drive Info submenu, scroll to Version. (See
6. Press Enter.
Figure 70: Tape drive version screen
Table 11: Tape Drive Version Messages
Product Type
Policy Version
Servo Version
94
The number indicates the autoloader SCSI ID number.
The number indicates the Logical Unit Number of the
autoloader.
Indicates whether the tape drive compression is enabled or
disabled.
Indicates whether a cartridge is present in the drive.
A list of messages similar to the following screen appears.
Product Type: DLT 1
Policy Version:
35.52
Servo Version:
65.6
The number indicates the type of product installed (DLT1).
The number indicates the version of the policy processor for
the tape drive, typically the tape drive firmware version.
The number indicates the servo processor firmware version.
Figure 61.)
Figure 62.)
Figure 63.)
SSL1016 Tape Autoloader Reference Guide