Ip Gateway - HP STORAGEWORKS SSL1016 Reference Manual

Installation and Configuration
3. On the Configuration submenu, scroll to Ethernet. (See
4. Press Enter.
5. On the Ethernet submenu, scroll to Set Subnet Mask. (See
6. Press Enter.
7. At each position of the mask address, scroll to the correct number and press
Figure 29: Setting the Subnet Mask
Note:
8. Press Enter.
9. Press Escape or Enter to return to the Ethernet submenu.

IP Gateway

An IP gateway is a device that converts data into the IP protocol.
To set an IP gateway:
1. On the main menu, scroll to Configuration. (See
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See
4. Press Enter.
5. On the Ethernet submenu, scroll to Set Gateway. (See
6. Press Enter.
50
Enter to advance your cursor.
Subnet Mask:
255.255.195.000
Use the Escape key to backspace to a previous text box, if necessary.
When you have set the mask, the autoloader displays Enter to save.
SUB addr changed to appears on the LCD. You do not need to reboot the
autoloader.
Figure
Figure
Figure 25.)
Figure
Figure
SSL1016 Tape Autoloader Reference Guide
26.)
27.)
26.)
27.)