Software - HP STORAGEWORKS SSL1016 Reference Manual

6. On the Cleaning Tape submenu, scroll to Auto Clean On/Off.
7. To change the setting, press the up or down scroll key once.
8. Press Enter.

Software

Set the cleaning option in your software application (if available) so that the
software monitors drive cleaning. If your application software supports automatic
cleaning, store a cleaning cartridge in the slot specified by the application.
Note:
Auto Clean option is disabled on the autoloader either via the LCD front panel or Web
Administration.
SSL1016 Tape Autoloader Reference Guide
If Auto Clean is enabled, the menu item appears as Auto Clean On. If Auto
Clean is disabled, it appears as Auto Clean Off.
If automatic cleaning is enabled in your application software, make sure the
Tape Drive Cleaning
125