Snmp Server - HP STORAGEWORKS SSL1016 Reference Manual

7. At each position of the gateway address, scroll to the correct number and press
Figure 30: Setting the gateway address
Note:
8. Press Enter.
9. Press Escape or Enter to return to the menu.

SNMP Server

An SNMP server monitors a network by processing reporting activity in each
network device (hub, router, bridge, and so on). The server uses this information
to define what is obtainable from each device and what can be controlled (turned
off, on, and so on).
To set an SNMP server:
1. On the main menu, scroll to Configuration. (See
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See
4. Press Enter.
5. On the Ethernet submenu, scroll to Set SNMP Server. (See
6. Press Enter.
SSL1016 Tape Autoloader Reference Guide
Enter to advance your cursor.
Default Gateway:
016.117.065.001
Use Escape to backspace to a previous text box, if necessary.
When you have set the gateway address, the autoloader displays Enter to save.
GW changed appears on the display. You do not need to reboot the
autoloader.
Installation and Configuration
Figure 25.)
Figure 26.)
Figure 27.)
51