6
6
-
•
•
The PC must also have a card creation application that formats and prepares the card
data. For the PC requirements of your card creation application, see the application's
documentation.
ID system installation sequence
You might use this printer as part of an identification system (with a camera) or you
might use it with existing data and applications. When you set up this printer along
with other system components, install the printer driver after setting up the PC and
before installing the card creation application and capture software and devices. Verify
the success of each installation step before continuing.
–
A network connection to support printer sharing or direct networking
Have a CD-ROM drive to install the printer driver
Have one of the following operating systems:
–
Windows Me or Windows 98 Second Edition
The Windows 98 printer driver is designed to work on Windows Me or
Windows 98 Second Edition.
–
Windows 2000 with service pack 2 (recommended)
–
Windows XP
–
Windows NT 4.0 with service pack 5 or higher
The Windows NT printer driver is designed to work on Windows NT with
Service Pack 5 or 6. The printer driver can be installed and used on Windows
NT with Service Pack 4; however it is possible that unexpected results could
occur. If you experience problems, consider installing Service Pack 5 or 6.
The printer cannot be connected to a PC running Windows NT using a USB
port.
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™
Before you install