Card storage specifications
The cards should be stored in a cool, dry, and dark place. Excessive light can cause
yellowing of cards on exposed edges. Keep cards in their original packaging.
Cards should be at room temperature when they are installed in the printer and used.
If cards are stored in a cooler environment than the printer, allow them to reach room
temperature before using.
Cleaning supplies
The Magna Class printer uses the following cleaning supplies.
•
•
•
•
•
•
Printer cleaning card
Use a printer cleaning card to remove particles left by printing supplies inside the
Magna Class printer. Use a printer cleaning card at the interval you set, such as every
250 cards (see
Printer cleaning cards are sold in packages of 10. The package part number is
557297-001. Printer cleaning cards are also sold as part of cleaning kits, described
below.
i
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™ Printers
Printer cleaning cards
Replaceable cleaning sleeves
Magnetic stripe cleaning card (only for printers with a magnetic stripe module)
Printhead cleaning pen
Duplex/laminator cleaning cards (if the printer includes an optional topcoat or
overlay (laminator) module)
Heated roller cleaning stick (if the printer includes an optional topcoat or overlay
(laminator) module)
"Working with Properties and other driver dialog boxes" on page
Figure B-4: Printer cleaning card
If the printer does not have a magnetic strip module, you can use cleaning card
part number 548714-001.
B-9
3-2).